Updated Nov 20, 2026· 12 min read

Key takeaways

  • Compare the best deadlift jacks for home gyms, with load capacity, footprint, bar height, and knurling protection specs for each mini and full-size pick.
⭐ Key Takeaways
Quick answer: Our top pick is RitFit Deadlift Jack, with Titan Fitness Mini Deadlift Barbell Jack as a strong alternative.

The best deadlift jack for most home gym lifters is a mini jack with a padded bar cup and a rated capacity comfortably above your heaviest pull: the RitFit Deadlift Jack leads this roundup with a 660-pound rating and a PVC-lined hook, the Titan Fitness Mini and Yes4All Mini cover the same one-side-at-a-time job with foot-lever and UHMW-padded designs, and the BRTGYM Mini and the Bar Jak round out the list for lifters who want a lighter or more compact tool. Every pick below is a barbell jack built for loading and unloading plates on a bar resting on the floor, with published specs on capacity, footprint, weight, and bar contact protection so you can match a jack to your training.

One distinction matters before you buy. A deadlift jack is not a deadlift wedge, and it is not a pulling block. A wedge is a small ramp you roll the innermost plate onto, and pulling blocks change the starting height of the lift itself. A jack is a lever tool that lifts one end of a loaded bar, or the whole bar on full-size models, so plates slide on and off freely. This guide covers lever jacks only.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

How to Choose a Deadlift Jack

Start with the format. Mini jacks hook under one sleeve and lever that end of the bar up, so you load one side, walk around, and repeat on the other end. They are small, light, and easy to store, which is why every pick in this roundup except the double-groove style designs is a mini or compact lever. Full-size jacks span the width of the bar and lift both ends at once, which suits dedicated platforms and shared gyms but demands far more floor space.

Capacity is the second filter. A mini jack only ever carries one end of the bar, so its rating applies to that end plus the share of the bar weight resting on it. Ratings in this group run from 600 to 660 pounds per jack, with the Bar Jak listing a 350-kilogram limit. Match the rating to the heaviest load you realistically load on one sleeve, not to your total deadlift, and leave headroom rather than running a jack at its ceiling every session.

Bar contact protection is the third filter. Bare steel hooks chew up knurling over time, so better jacks line the cup with UHMW plastic, PVC, or a similar sacrificial layer. The RitFit, Titan, and Yes4All picks below all publish some form of lined or padded contact point; if a jack you are considering is bare steel on steel, expect cosmetic wear on the bar shaft where it rests.

Finally, check footprint and weight against your space. Mini jacks in this roundup run from about 17 to 20 inches long and from roughly 2.4 to 13 pounds. The lighter tools travel in a gym bag and hang on a wall hook; the heavier foot-lever designs stay planted better under a hard pull on the handle. Neither is wrong, but the right pick depends on whether the jack lives beside a platform or moves with you.

1. RitFit Deadlift Jack

The RitFit Deadlift Jack is the default recommendation for most home gyms because it pairs the highest capacity in this group with the smallest footprint. The listing rates it at 660 pounds, and because a mini jack lifts one sleeve at a time, that ceiling covers the per-side load of very heavy pulls. The frame measures 16.93 by 7.87 inches, small enough to lean against a rack upright or slide under a platform edge between sessions.

The contact hook is lined with PVC, which is the detail that matters most for bar longevity: the lining cushions the shaft and keeps steel off the knurling where the bar rests. The handle is a non-slip grip with a 1-inch grip size, and the base carries the same non-slip treatment so the jack stays put on smooth concrete while you lever. At 4.6 pounds it is easy to carry to either end of the bar, and it arrives with no assembly required.

The honest limitation is the format itself. Like every mini jack, it lifts one side at a time, so the far end of the bar stays on the floor and plate changes alternate sides. Lifters who run a dedicated platform and change plates for several training partners may still prefer a full-size jack, but for a single home gym lifter the RitFit covers the job with the least fuss in this group.

Specs

  • Capacity: 660 lb weight limit
  • Footprint: 16.93 x 7.87 in
  • Item weight: 4.6 lb
  • Materials: metal frame with plastic and PVC lining
  • Handle: non-slip grip, 1 in grip size
  • Assembly: none required

2. Titan Fitness Mini Deadlift Barbell Jack

Titan Fitness Mini Deadlift Barbell Jack

Titan Fitness Mini Deadlift Barbell Jack

Check price on Amazon

The Titan Fitness Mini Deadlift Barbell Jack, part number MBARJACK, takes a different approach to leverage: it is foot-activated, so you step on the lever and keep both hands free to steady the bar and slide plates. Titan rates it at 600 pounds, and the cup is lined with UHMW plastic, the same protective material used on the brand’s larger gym equipment, so the bar shaft rests on plastic rather than bare steel.

Published dimensions put the cup at 2.25 by 2.25 by 2.25 inches, sized for standard Olympic bar shafts, and the lifted bar height is about 10 inches, enough to spin plates on and off the sleeve. At 13 pounds it is the heaviest mini jack in this roundup: it stays planted when you stand on the lever, but it is the one you leave beside the platform rather than carry in a gym bag.

The alloy steel frame wears a black powder coat. Because the lift comes from your foot and body weight, very heavy per-side loads take more effort than with a long-handle design. For routine home gym loading, though, the hands-free operation is a genuine workflow advantage that handle-style jacks cannot match.

Specs

  • Capacity: 600 lb weight limit
  • Part number: MBARJACK
  • Item weight: 13 lb
  • Cup: 2.25 x 2.25 x 2.25 in, UHMW lined
  • Lifted bar height: about 10 in
  • Operation: foot-activated lever
  • Frame: alloy steel, powder coated

3. Yes4All Mini Deadlift Barbell Jack

Yes4All Mini Deadlift Barbell Jack

Yes4All Mini Deadlift Barbell Jack

Check price on Amazon

The Yes4All Mini Deadlift Barbell Jack is the handle-style alternative, built around a padded hooking grip and a UHMW-padded contact plate. The listing rates it at 600 pounds, and the published dimensions are 20.13 by 12.2 by 4.5 inches, making it the longest mini jack in this group. That extra length translates into leverage: the longer body gives you more mechanical advantage when the bar is loaded near the rating.

The frame is steel with an anti-corrosion coating, and the post leg sits at an angle the brand publishes as its leverage position, so the jack rocks onto its base as you pull the handle rather than sliding across the floor. The padded contact plate protects the bar finish at the rest point, and the padded handle grip is a welcome detail when you are levering a heavy bar with chalked hands. The unit weighs about 8.1 pounds, splitting the difference between the featherweight Bar Jak and the foot-lever Titan.

Yes4All publishes a 1-year warranty for this model. The trade-off for the leverage is storage: at just over 20 inches long it needs a shelf, a wall hook, or floor space beside the platform rather than a spot inside a typical gym bag.

Specs

  • Capacity: 600 lb weight limit
  • Dimensions: 20.13 x 12.2 x 4.5 in
  • Item weight: about 8.1 lb
  • Model number: 43528-148025
  • Contact plate: UHMW padded
  • Frame: steel with anti-corrosion coating
  • Warranty: 1 year published by the brand

4. BRTGYM Mini Deadlift Jack

BRTGYM Mini Deadlift Jack

The BRTGYM Mini Deadlift Jack is the straightforward budget-tier entry in this group: a carbon steel mini jack with a black powder-coated finish, rated at 600 pounds. The published specs are leaner than the picks above it, but the fundamentals are all present, including the same one-side-at-a-time lever action and a hook sized for Olympic bar sleeves.

At 5.73 pounds it is light enough to carry between the platform and storage without thinking about it, and the carbon steel construction is a step up in material terms from the mild steel used on many no-name mini jacks. The powder coat protects the frame from the chalk dust and humidity that garage gyms generate, both of which attack bare steel quickly.

What you give up at this tier is published detail. The listing does not specify a lined contact cup, so if protecting bar knurling is a priority, compare it carefully against the PVC-lined RitFit and the UHMW-padded Yes4All and Titan above. As a first jack for a lifter who is tired of tipping plates onto a loaded bar by hand, it covers the core task at the budget end of the range.

Specs

  • Capacity: 600 lb weight limit
  • Material: carbon steel
  • Finish: black powder coat
  • Item weight: 5.73 lb
  • UPC: 742484179024
  • Style: mini jack, handle lever

5. Bar Jak Deadlift Barbell Jack

Bar Jak Deadlift Barbell Jack

Bar Jak Deadlift Barbell Jack

Check price on Amazon

The Bar Jak is the premium compact design in this group and the lightest tool here by a wide margin. It is a high carbon steel hook-style jack weighing just 1.1 kilograms, about 2.4 pounds, so it genuinely travels in a gym bag or hangs on a hook without a second thought. The listing publishes a 350-kilogram weight limit, the highest per-jack ceiling in this roundup, and the brand states the design is strength tested to 300 kilograms.

The Bar Jak works differently from the frame-style minis. Instead of a base and lever arm, the compact hook slides under the bar shaft and uses its curved profile to roll the bar up as you pull, which is why it can be so much smaller than a framed jack. The brand publishes compatibility with standard Olympic barbells and a grip diameter range of 25 to 29 millimeters, which covers the shaft diameters of typical power and Olympic bars.

The model number is barjak2, and the design is a registered one, which separates it from the generic hook jacks that imitate the shape. The compromise is technique: a hook-style jack rewards a practiced motion, and first-time users should rehearse the movement with a lightly loaded bar before trusting it under a top set. For experienced lifters who train in more than one location, nothing else in this group comes close on portability.

Specs

  • Weight limit: 350 kg as listed
  • Item weight: 1.1 kg (about 2.4 lb)
  • Material: high carbon steel
  • Model number: barjak2
  • Bar fit: Olympic barbells, 25 to 29 mm grip diameter
  • Style: compact hook jack, no frame

What to Look for When You Compare Deadlift Jacks

Lever style. Handle-lever minis (RitFit, Yes4All, BRTGYM) ask you to pull with one hand while the other manages plates. The foot-activated Titan keeps both hands free but asks for body weight on the lever. The hook-style Bar Jak trades a small learning curve for the smallest possible tool. Pick the style that matches how you actually change plates between sets.

Capacity per side. Mini jack ratings describe one end of the bar. A 600-pound rating does not mean the jack struggles with a 600-pound deadlift; it means the load resting on that jack, roughly half the bar plus plates on that side, should stay under the rating. Every pick here clears the per-side loads of typical home gym training with room to spare.

Contact protection. UHMW and PVC linings exist to keep steel hooks off your bar’s knurling and finish. If you own a bar you care about, treat a lined cup as a requirement rather than a bonus, and check the lining for wear during your regular equipment checks, since it is a sacrificial layer by design.

Floor surface. Jacks lever against the floor, so a hard, level surface matters. On thick rubber stall mats, a wide base spreads the load and resists rocking; on bare concrete, a non-slip base keeps the jack from skating as you pull. None of these tools fix a sloped or uneven garage floor.

Storage. Measure where the jack will live. The Bar Jak disappears into a gym bag, the RitFit and BRTGYM tuck against a rack, and the Titan and Yes4All are happiest with a permanent spot beside the platform. The jack that fits your storage is the one that gets used every session.

Frequently Asked Questions

Do I need one deadlift jack or two?

One is enough for most home gym lifters. A mini jack lifts one end of the bar at a time, so you load one side, move the jack, and load the other. Two jacks, one parked at each end, speed up changes when training partners rotate through the same bar, but a single jack covers solo training completely.

Will a deadlift jack work with bumper plates and iron plates?

Yes, as long as the plates are loaded on a standard Olympic bar. The jack lifts the bar shaft, not the plates, so plate material does not change how it works. What matters is clearance: the lifted bar height, about 10 inches on the Titan Mini, needs to raise the sleeve enough that the largest plate clears the floor while you slide the next one on.

Can a deadlift jack damage my barbell?

A bare steel hook can mark knurling and wear through bar finishes over time, which is why the RitFit, Titan, and Yes4All picks in this roundup publish lined or padded contact points in UHMW plastic or PVC. Choosing a lined jack and keeping the lining intact is the simple way to protect the bar.

What capacity deadlift jack should I buy?

Match the rating to the load on one end of your heaviest bar, not the total weight of the lift. For most home gyms, the 600 to 660-pound ratings in this group are well beyond per-side loads in normal training. If you regularly pull loads that put several hundred pounds on a single sleeve, choose the highest-rated pick your space allows and keep a margin under the ceiling.

Conclusion

For most lifters, the RitFit Deadlift Jack is the buy: the 660-pound rating, the PVC-lined hook, and the smallest footprint in this group make it the easiest jack to live with. The Titan Fitness Mini is the pick if you want hands-free, foot-activated lifting and a permanent spot beside the platform, while the Yes4All Mini suits lifters who want the extra leverage of a longer handle-style frame. The BRTGYM Mini covers the budget tier without giving up a carbon steel build, and the Bar Jak is the premium choice for anyone who needs a jack that disappears into a gym bag. Any of the five ends the plate-change struggle that makes heavy deadlift sessions longer than they need to be.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Deadlift Jacks: 5 Picks for Faster Plate…Check price on Amazon