Key takeaways
- A ducted wall-mount chimney hood suits a kitchen with existing or feasible exterior venting and strong cooking odors or heat to clear, while a…
A ducted wall-mount chimney hood suits a kitchen with existing or feasible exterior venting and strong cooking odors or heat to clear, while a recirculating (ductless) wall-mount hood suits a kitchen where venting outside isn’t possible, with the tradeoff of filtering rather than fully removing air.
A wall-mounted range hood installs directly above a cooktop on an exterior or interior wall (as opposed to an island hood, which hangs from the ceiling, or an under-cabinet hood, which tucks beneath upper cabinetry). The main decisions are venting type (ducted vs. recirculating), size relative to the cooktop, and airflow capacity, measured in cubic feet per minute (CFM).
At a Glance
| Type | Best For | Key Stated Specs | Limits |
|---|---|---|---|
| Ducted wall-mount chimney hood | Kitchens with real exterior venting access, heavy or frequent cooking | CFM rating sized to cooktop output, external or in-line blower options, decorative chimney housing | Requires ductwork routed to the outside; more complex install than ductless |
| Recirculating (ductless) wall-mount hood | Kitchens where exterior venting isn’t feasible (interior walls, apartments) | Charcoal/carbon filter stage plus grease filter, recirculates filtered air back into the room | Removes odor and some smoke but not heat or humidity the way true venting does; filters need regular replacement |
| Convertible hood (ducted-capable, sold ductless-ready) | Buyers unsure of future duct access, or planning a later remodel | Can run ducted with the right blower/ducting kit or ductless with a charcoal filter kit | Buying both the ducted and ductless accessory kits can add cost if needs change later |
| Low-profile/basic wall-mount hood | Light cooking, secondary kitchens, budget installs | Lower CFM range, simpler single-speed or basic multi-speed fan | May struggle with heavy searing, frying, or wok-style cooking odor and grease |
Ducted vs. Recirculating: The Core Decision
A ducted hood pulls air, grease, smoke, and heat up through a grease filter and pushes it out of the home through ductwork to an exterior vent. This is the only design that actually removes cooking byproducts from the home rather than filtering and returning them. A recirculating hood passes air through a grease filter and typically an additional charcoal/carbon filter to reduce odor, then releases the filtered air back into the kitchen; it does not vent heat, humidity, or grease outside, so it manages cooking conditions rather than fully clearing them. Recirculating hoods are mainly a solution for kitchens where running duct to the exterior isn’t physically possible or is prohibitively disruptive, such as some interior-wall kitchens or many apartment and condo units with restrictions on exterior modifications.
Sizing: Width and CFM
- Width: a hood should generally be at least as wide as the cooktop it covers, and many kitchen designers suggest sizing a few inches wider on each side for better capture of rising air, especially over wider ranges or professional-style cooktops.
- Mounting height: the manufacturer’s manual specifies a minimum and maximum height above the cooktop; mounting too high reduces capture efficiency, and mounting too low can create a safety and comfort issue with heat and steam.
- CFM rating: a common guideline is roughly 1 CFM per 100 BTUs of cooktop output for gas, though many kitchen designers recommend higher CFM for heavy searing, wok cooking, or a professional-style range; check appliance-industry sizing guidance for the specific cooktop’s BTU rating rather than guessing.
- Duct run length and bends: longer duct runs and more bends reduce effective airflow even if the hood itself is rated for high CFM, so actual ducted performance depends on the full duct path, not just the hood’s rated output.
Features and Fit Notes
Baffle filters (angled metal slats) generally handle grease capture and cleaning better over time than flat mesh filters, which can clog faster and need more frequent washing. Multi-speed or variable-speed fan control lets you match airflow to the cooking task, running low for simmering and high for searing or frying. LED cooktop lighting built into the hood is standard on most current models and should provide even light across the full cooktop surface. For wall-mount installation specifically, confirm the wall material can support the hood’s mounting hardware and weight, and check that nearby cabinetry doesn’t block the duct path or the hood’s minimum clearance to combustible surfaces above the cooktop, a figure set by the cooktop or range manufacturer as well as the hood manufacturer.
Pick X If…
| If you… | Choose |
|---|---|
| Have or can add exterior duct access | Ducted wall-mount chimney hood |
| Live somewhere exterior venting isn’t possible | Recirculating (ductless) wall-mount hood |
| Aren’t sure yet whether ducting will be available | Convertible hood that can run either way |
| Cook lightly and want the simplest, lowest-cost option | Low-profile/basic wall-mount hood |
| Cook with high heat, frequent frying, or wok-style methods | Higher-CFM ducted hood sized to the cooktop’s BTU output |
Alternatives Worth Considering
Under-cabinet hoods fit under existing upper cabinetry rather than standing alone on the wall, suiting kitchens where a full chimney-style hood doesn’t fit the layout or design.
Island or ceiling-mount hoods are the right category when the cooktop is on an island rather than against a wall, since a wall-mount hood by definition needs a wall behind the cooktop.
Downdraft ventilation systems pull air downward through or behind the cooktop instead of upward through an overhead hood, an option for kitchens that specifically want to avoid any overhead hood for sightline or design reasons, though they’re generally considered less effective at capturing rising heat and steam than an overhead hood.
Frequently Asked Questions
Do I need a ducted hood, or is recirculating good enough?
If exterior venting is physically possible, a ducted hood removes heat, humidity, and odor from the kitchen rather than just filtering and returning the air, which most kitchen-design guidance favors for heavier cooking. Recirculating hoods are a reasonable fallback specifically for kitchens where ducting to the outside isn’t feasible.
What size hood do I need for my cooktop?
As a starting point, match or slightly exceed the cooktop’s width, and size CFM to the cooktop’s BTU output using standard sizing guidance (roughly 1 CFM per 100 BTUs for gas as a common rule of thumb), adjusting upward for heavy searing, frying, or a professional-style range.
How high should a wall-mount hood be installed above the cooktop?
The cooktop or range manufacturer and the hood manufacturer both specify minimum and maximum mounting heights; following the lower manufacturer’s minimum clearance protects against heat damage, while staying within the hood’s maximum height keeps capture efficiency reasonable.
How often do hood filters need cleaning or replacement?
Grease filters (metal mesh or baffle) generally need periodic washing, often monthly with regular cooking, while charcoal/carbon filters in recirculating hoods are typically not washable and need replacement on a schedule set by the manufacturer, usually every few months depending on cooking frequency.
Can I convert a recirculating hood to ducted later?
Only if the specific model is sold as convertible/ducted-capable; a true recirculating-only hood generally lacks the outlet and blower configuration needed for ducting, so check the product’s stated conversion capability before assuming it can be changed later.
Is a more powerful (higher CFM) hood always better?
Not necessarily. Oversizing CFM relative to the kitchen’s size and makeup air situation can cause issues like difficulty closing exterior doors or backdrafting other combustion appliances in the home; sizing to the cooktop’s actual output and the kitchen’s size, per standard ventilation guidance, is a better approach than choosing the highest CFM available.
Related guides
- Best Fire Alarm Heat Detector: Picks and What to Look For (2026)
- Best Power Line Filters Single Phase: Picks and What to Look For (2026)
- Best Pepper Mill Sets Premium Wooden: Picks and What to Look For (2026)
- Best 1 Inch Flow Switch: Picks and What to Look For (2026)
- Best Boning Knives: Picks and What to Look For (2026)