Updated Nov 18, 2026· 7 min read

Key takeaways

  • For a home or small-shop screen printing setup running under a few hundred shirts a week, a compact conveyor dryer with a belt around 16-20 inches wide…

For a home or small-shop screen printing setup running under a few hundred shirts a week, a compact conveyor dryer with a belt around 16-20 inches wide and a shorter tunnel length is the practical entry point; higher-volume shops curing hundreds to thousands of shirts daily need a wider belt (24 inches or more), a longer heated tunnel, and stronger stated airflow to keep cure temperatures consistent at speed.

What a Conveyor Dryer Does in a Screen Printing Shop

A conveyor dryer (also called a curing conveyor or screen print dryer) moves freshly printed garments through a heated tunnel on a continuous belt, curing plastisol or other heat-cured inks at the temperature and dwell time the ink manufacturer specifies. Unlike a flash cure unit, which cures one small area of ink in place before the next print stage, a conveyor dryer is meant to fully cure an entire finished print as the garment travels the length of the belt — making it the standard choice for any shop printing at meaningful volume rather than one-off pieces.

Proper curing is not just about color or feel: plastisol ink that isn’t brought to the correct internal temperature for long enough can wash out or crack after a few launderings, which is why manufacturers publish specific cure temperature and dwell-time guidance that shops are expected to follow and verify, not estimate.

Who Actually Needs a Conveyor Dryer

  • Home-based or garage screen printers moving beyond flash-cure-only setups into full production runs.
  • Small print shops fulfilling local team, event, or small business orders where consistent batch curing matters.
  • Growing shops that have outgrown a single flash unit and need continuous throughput rather than one-at-a-time curing.
  • Contract printers running multiple ink types (plastisol, some specialty inks) that need different, repeatable temperature profiles.

Shops doing only occasional one-off prints, or exclusively direct-to-garment/sublimation work that doesn’t require plastisol curing, may not need a conveyor dryer at all — a heat press or flash cure unit alone can sometimes cover very low-volume plastisol needs.

At a Glance

Tier Best for Key stated specs Limits
Compact entry-level (belt ~16″-20″) Home shops, startups, low weekly volume Shorter tunnel length; lower stated wattage; smaller footprint Slower effective throughput; may need multiple passes for thick ink deposits
Mid-size shop unit (belt ~20″-24″) Small-to-medium shops with steady daily runs Longer tunnel than entry units; adjustable belt speed and temperature controls Needs more floor space and dedicated electrical circuit capacity
High-volume/production unit (belt 24″+) Multi-press shops curing hundreds-plus shirts daily Longer heated tunnel, higher stated airflow/CFM, multi-zone temperature control on some models Highest power draw; largest footprint; typically needs 220V/three-phase service
Specialty narrow/sample dryers Sampling, small items, or tight-space shops Narrower belt for small goods or limited garment widths Not suited to oversized prints or wide-format garments

Fit, Size, and Compatibility Notes

  • Belt width vs. press pallet size: confirm the dryer’s belt width comfortably clears your press’s largest pallet and the widest prints you run; a belt that’s too narrow forces awkward garment placement and inconsistent curing.
  • Tunnel length and dwell time: longer tunnels allow slower, gentler heating or faster belt speeds while still meeting an ink’s required dwell time; shorter tunnels generally mean slower belt speeds to hit the same cure, which caps throughput.
  • Electrical requirements: entry-level units often run on standard household circuits, while mid-size and production units commonly require 220V single-phase or three-phase power — confirm your shop’s electrical service matches before ordering, since this is one of the most common installation snags reported by shop owners.
  • Ventilation and clearance: conveyor dryers generate significant heat and should be sited with the clearance and ventilation the manufacturer specifies, away from flammable materials and with adequate airflow for the exhaust.
  • Infeed/outfeed space: factor in physical floor space not just for the dryer itself but for an infeed table before it and a cooling/stacking area after it, since garments exit hot and need a moment to cool before folding or boxing.

Pick This If…

Scenario Recommended tier
Home or garage shop, low weekly volume, tight budget and space Compact entry-level conveyor dryer
Small shop with steady daily orders and standard garment sizes Mid-size shop unit
Multi-press production shop curing large daily volumes High-volume/production unit with longer tunnel
Mostly sampling, small goods, or very limited floor space Specialty narrow/sample dryer
Only curing flash-area prints, no full-garment plastisol runs A flash cure unit may suffice instead of a full conveyor dryer

Verifying Cure, Not Just Guessing

Because a dryer that “looks hot enough” can still under-cure or over-cure ink, most experienced printers use a non-contact infrared thermometer to check the actual garment surface and, more importantly, ink deposit temperature as it exits the dryer, comparing that reading against the ink manufacturer’s specified cure temperature. A simple wash test — laundering a cured sample per the ink maker’s instructions and checking for cracking or fading — is also a commonly recommended way to confirm a dryer’s settings are actually producing a durable cure, rather than relying on belt speed and dial settings alone.

Alternatives Worth Considering

Flash Cure Units

A flash cure unit heats one printed area at a time, usually as part of the printing sequence on a rotary press, rather than fully curing a whole garment on a moving belt. These work well for curing between color layers or for very low-volume full-garment curing, but they are far slower per garment than a conveyor dryer for finishing complete production runs.

Combination Flash/Cure Tunnel Units

Some compact machines combine a short flash stage with a mini conveyor tunnel in one unit, aimed at shops with very limited space that still want some continuous-belt curing capability. These generally trade some throughput and tunnel length for a smaller overall footprint.

Industrial Textile Ovens

Larger operations sometimes use batch ovens or industrial textile curing ovens instead of a belt-style conveyor, especially for specialty substrates or very high-volume continuous operations. These are a bigger investment and footprint commitment, generally only justified at a production scale well beyond a small or growing shop.

Safety and Maintenance Notes

Conveyor dryers run at high sustained temperatures and should always be installed, operated, and maintained per the manufacturer’s manual, including any stated clearance from walls, combustible materials, and foot traffic. Routine maintenance commonly includes belt tension checks, cleaning of ink or lint buildup on the belt surface, and periodic verification of actual chamber and surface temperatures against the control panel’s displayed setting, since heating elements and sensors can drift out of calibration over time. Follow the manufacturer’s guidance for electrical servicing and never bypass safety interlocks or thermal cutoffs.

Frequently Asked Questions

How do I know what temperature to set my conveyor dryer to?

The correct cure temperature and dwell time come from the specific ink manufacturer, not the dryer manufacturer, since different plastisol and specialty ink formulations cure at different temperatures. Always check the ink’s technical data sheet and verify the actual garment or ink-deposit temperature with an infrared thermometer rather than relying solely on the dryer’s dial setting.

What’s the difference between a flash cure unit and a conveyor dryer?

A flash cure unit heats a specific printed area in place, typically between color passes on a press, while a conveyor dryer fully cures an entire garment as it travels through a heated tunnel on a belt. Most production shops use both: flash units mid-print and a conveyor dryer for final full curing.

Can I use a conveyor dryer for inks other than plastisol?

Many conveyor dryers can cure other heat-set inks as long as the required cure temperature falls within the dryer’s stated operating range, but always check both the ink manufacturer’s cure specifications and the dryer’s documented temperature range before running a new ink type. Some specialty inks or substrates may need different dwell times or temperatures than standard plastisol.

Why does my shop need 220V power for a conveyor dryer?

Larger conveyor dryers draw more electrical power to heat a longer tunnel to production-ready temperatures quickly, which often exceeds what a standard household 120V circuit can safely supply. Checking the specific model’s stated voltage and amperage requirements against your shop’s electrical service before purchase avoids a costly installation surprise.

How do I test if my dryer is actually curing ink properly?

A simple and widely recommended method is washing a cured sample garment according to the ink manufacturer’s care instructions and checking for cracking, fading, or ink loss afterward. Combining this with regular infrared temperature checks at the dryer’s exit point helps confirm the cure is consistent across different garment thicknesses and belt speeds, not just on the one spot checked initially.

How much floor space does a conveyor dryer actually need?

Beyond the dryer’s own footprint, shops need room for an infeed table before the belt and a cooling or stacking area after it, since garments exit hot. Manufacturers typically publish overall unit dimensions along with recommended clearance for ventilation and safe operation, so measure the intended space against those published figures, not just the tunnel length alone, before committing to a model.

K
Kocoda Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.